Sustainable Building Design

5 Ways to Improve Building Sustainability Using MEP Design Strategies

Economical MEP answers for your building

Regardless of whether you are in the development stage, claim a more seasoned building, or are hoping to patch up minor requirements for better building performance, the best MEP consultants can address your needs and requirements for making your building more efficient.

Some of the following strategies can be useful for advanced building performance and system efficiency.

#1 Controlling CO2 Emissions

The majority of carbon dioxide emissions from structures can be attributed to the burning of petroleum products to give cooling, heating, lighting, and power for various day-to-day appliances and electrical gear. Other carbon dioxide emanations can be ascribed to the materials used in building construction and maintenance.

Structures can diminish the measure of carbon dioxide they emanate with dynamic building designs. Utilizing the most effective warming, ventilation, and aerating and cooling frameworks, alongside appropriate support of these frameworks can guarantee the largest amounts of execution, bringing down the level of discharges.

Utilizing privately-sourced construction materials, diminishing water use, and utilizing reused content for buildings can likewise diminish a building’s carbon dioxide emanations.

#2 Cutting Back on Energy Consumption in HVAC and lighting

General building configuration can decide the measure of lighting, warming, and cooling a building will require. According to the Annual Statistics Report published by DEWA, the Residential sector was responsible for about 74% of the total energy consumed in Dubai, in 2016 and 79% of the total electricity consumed in residential applications was for cooling and air conditioning systems.

Fig 1. Electricity Consumed in Dubai 2016

As these two aspects are the principal reasons for maximum energy consumption, it is vital to advance the plan and effectiveness of these frameworks, keeping in mind the end goal to bring down cost and lessen a building’s environmental footprint.

Consistent Engineering Consultants’ HVAC arrangements incorporate procedures that make utilization of characteristic ventilation and regular warmth sources, eliminating excessive energy use in ordinary frameworks, coordinating new effective advances into HVAC operations, and numerous different strategies to make HVAC frameworks more capable. In one of its projects, the MEP consultant company in Dubai has achieved 15% greater energy conservation than the mandatory green building standards.

Lessening lighting uses can be accomplished by creating plans that permit more normal light into homes and by utilizing more proficient methods.

#3 Reduced Use of Water

Techniques to conserve water are essential in every aspect of the world, regardless of whether your building’s atmosphere, from dry and desert areas to those in tropical regions. There are various outlines and strategies that can enable a functioning environment to bring down its water utilization and save the expenditure on water bills.

Introducing low-stream apparatuses is an important initial step a building proprietor can take. Low-stream fixtures use around 40% less water than standard spigots, and low-stream toilets can spare around 2.2 gallons of water for each flush.

Greywater frameworks can likewise give noteworthy water preservation. Most structures utilize drinking water for all uses, yet numerous systems, for example, a water system or can flushing, don’t require it. Greywater is water that has been utilized for washing,but is relatively clean and can be utilized for applications where consumable water isn’t vital.

Effluent water can also be used in centrifugal water-cooled chillers, cooling towers, and pumps equipped with VFD, which helps reuse the water effectively.

#4 Efficient Power Utilization

Keeping in mind the end goal to decrease the measure of power utilized as a part of a building, it is necessary to gauge possible avenues for energy conservation and put into practice the most innovative procedures that can be joined to reduce consumption costs for proprietors.

Lighting, PCs, office gear, warming and cooling frameworks, and various different apparatuses can raise power utilization.

Using sustainable power sources like sunlight-based systems or wind control, deciding amongst power and unique frameworks, understanding the size and area of required space and installing sustainable systems accordingly are all ways to ensure that the frameworks work at ideal efficiency.

#5 Use of Equipment Having High Coefficient of Performance (COP)

Equipment having high coefficient of performance consumes less energy and contributes to the overall reduction in power consumption. High efficiency of systems can be achieved by roper installation and regular maintenance, which ensures better functioning of the complete environment.

Improved system performance has an impact on the holistic growth of the building and thus provides for increased conservation of energy.

These are the 5 aspects to be considered in the MEP design process for a building to increase building performance and make it more sustainable. The work of professional MEP consultants is invaluable here, as they can help contractors figure out the best ways to design an energy-efficient building and optimize the power consumed.

Leave a Reply

Your email address will not be published. Required fields are marked *